10 inch rack Raspberry Pi with flexiDOCK MB521SP-B and keystone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Looks over function. I made a little 10 inch rack mount for my Raspberry Pi with a flexiDOCK MB521SP-B and a keystone
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a little 10 inch rack mount for my Raspberry Pi 4b (but the 5 should also fit) with a flexiDOCK MB521SP-B
There are options with more disks but i'm not confident it will work (not enough power through a single USB port).
The flexiDOCK is a tight fit and I connected it with a Ugreen USB to SATA connector, you will need some longer m3 screws to mount it as the screws it comes with are way to short.
Why the flexiDock? It looks cool and makes it easier to swap disks if you want to.
I printed it upright/facedown and didn't need any supports on bambulab P1S
Only downside is the tight placement for the fan if you have a POE adapter. Especially if you use a mod like I did (from https://www.printables.com/model/289387-pi-poe-40mm-fan-hat-adapter). I think I'll print a small half u grill or something to let it vent more.
edit: I added a V2 with room for a 40mm fan (I used a 5v one so directly to the pi).