1 / 2
Tamiya TT 1:10 Felge | Rim 1/10 Y-5 || W: 26mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tamiya-Felge einer klassischen BBS-Felge nachempfunden. Tamiya rim modelled on the design of a classic BBS Rim.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 172
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (39)Powiązane
Die Felgen sind in "meinem" Standard-Offset konstruiert (je nach dem welche Karosserie ich fahre). Falls ihr andere Offsets braucht, kontaktiert Beachtet meine Offset-Tabelle. | The rims are designed in "my" standard offset (depending on which body I drive). If you need other offsets, just contact me. I will then add further variations. Please refer to my offset table. |