Rapidstrike Trigger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified Trigger for a Nerf Rapidstrike in combination with the switch plate from ahalekelly
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 552
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently modified a Rapidstrike and rewired everything. I used the switch plate from ahalekelly, which is imho the best way to make rewiring smooth and easy. BUT, there's one thing I always wanted to change… the trigger he provided is looking a lot like the original (which is not bad, but I wanted a different look. I decided to make it a lot slimmer and when I tested it, I saw another problem. The top is touching the wires on S3 com, which can cause either the wires to get damaged or block the trigger, which is both bad… so I made to top way smaller and I also changed the backside to only touch the lower part of the S1 Trigger, so It doesn't interfere with anything else.
You can easily print this trigger upside down, I printed it without any support.