1 / 2
HEPA filter mount für Bambulab with magnets and pins
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the model from @Generics_116748 . A HEPA filter holder with magnets and built-in holes for 2mm pins.
- Ocena
- 4 / 5
- Polubienia
- 8
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (13)Powiązane
At first I tried a different model as a holder for a filter, but I had big problems because the holder kept slipping.
That's why I used 8x3mm magnets here and incorporated 3 holes for 2mm pins.
These fit exactly into the holes around the fan outlet on the P1S.
This means that the holder holds very firmly and nothing slips anymore.