Adventurer 5M - LED Light Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LED Strip Light Mounts for left, right, and front. This is designed to fit the Adventurer 5M and with 5x3mm magnets.
- Ocena
- 5 / 5
- Polubienia
- 87
- Pobrania
- 895
- Wydruki
- 3
- Wyświetlenia
- 6375
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
LED Strip Light Mounts for left, right, and front of the printer. This is designed to fit the Adventurer 5M.
The side mounts will work on 5Ms with or without the enclosure upgrade and are designed to Mount with 5: 5x3 magnets each. The front mount only fits on the enclosure and is secured to the risers with 2: M3 screws.
The lights I used are COB 8mm self adhesive LED strips. I soldered my led strips to an XH 2.54mm 2pin male connector so I could put it right into the board on the back of the printer.