1 / 2
Skadis Switch Dock with Pegs and 24 Cartridge Slots — zdjęcie 1
1 / 2

Skadis Switch Dock with Pegs and 24 Cartridge Slots

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed multiple models to create a Nintendo Switch Dock for Skadis with a 24-cart display and optional logo

Ocena
5 / 5
Polubienia
22
Pobrania
106
Wydruki
1
Wyświetlenia
841
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I combined 3 models I liked to create a Skadis stand for the Nintendo Switch that can hold 24 games. It also has an option for a logo with debossed lettering that can be printed in another color. There is also a version of the debossed logo that's less far in case your printer has trouble handling the overhang.

I printed the debossed model in PLA with a 0.4mm nozzle at 25% gyroid infill, supports only on the pegs for the back, and a second filament for a white logo upfront. The print took just under 12 hours with the X1C. I had some warping on the base, but that's because the build plate adhesion wasn't great. It's probably better to print this in ASA in the long term, but I haven't tested that yet.

The tolerances on the hooks are pretty tight. I don't mind them because they keep the mount upright, but others may want to adjust so it slides on easier. I found there to be enough space for a dock cover, but again, others may want to adjust, so I included the Fusion 360 file.

Tagi