1 / 4
Jumper T20/T20S screen stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jumper T20/T20S screen stand
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 559
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
这是一个Jumper T20/T20S遥控器的屏幕底座，通过与相机快拆组件的结合，实现fpv屏幕的角度调整和快拆。由于安装屏幕后遥控器重心会发生变化，推荐搭配对应的重心调整器使用。需要购买以下部件：
- 1/4相机云台螺丝，螺帽厚度2.4mm，直径12mm（以下淘宝链接选择 “TF7012” https://item.taobao.com/item.htm?_u=q2rtt1gkf5ef&id=680910218080&spm=a1z09.2.0.0.7a7a2e8dPpJS79&skuId=5053611055098）
- 相机快拆座（以下淘宝链接选择 “三卡迷你快装座”https://detail.tmall.com/item.htm?_u=q2rtt1gkf851&id=710074809045&skuId=5381379826585&spm=a1z09.2.0.0.7a7a2e8dPkXb7h）
- 运动相机紧固螺杆（以下淘宝链接选择 “xx短款”https://detail.tmall.com/item.htm?_u=q2rtt1gk9ebd&id=735727499717&spm=a1z09.2.0.0.7a7a2e8dPkXb7h&skuId=5256864163719）
- gopro接口一字夹（以下淘宝链接选择 “gopro接口一字夹”https://item.taobao.com/item.htm?_u=q2rtt1gk9153&id=677256229149&spm=a1z09.2.0.0.38d42e8dvDutt8&skuId=4866268325604）
- M3*20圆头内六角螺丝（遥控器自带M3*10内六角螺丝，但长度较短紧固效果不佳，推荐使用M3*20的螺丝）
This is a screen stand for Jumper T20/T20S controller, which, through integration with a quick-release camera mount, enables angle adjustment and quick release of the FPV screen. Since installing the screen will change the center of gravity of the controller, it is recommended to use it with a gravity adjuster. The following parts need to be purchased:
- 1/4 camera screw，12+¼-20+5.5*3.1*2.4
- Camera quick-release seat
- GoPro interface phone clamp
- M3*20 BHCS (the controller comes with M3*10 BHCS, but the length is short and the tightening effect is poor, so M3*20 BHCS are recommended)
