Geeetech A10 (Late 2018) Part Cooling Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had a lot of trouble finding a fan duct model which worked on the late 2018 version of the Geeetech A10 - all the…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 242
- Wydruki
- 0
- Wyświetlenia
- 861
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I had a lot of trouble finding a fan duct model which worked on the late 2018 version of the Geeetech A10 - all the versions I found were too wide and didn't work. This is a reimplementation that's close to the original, with some modifications for easier printing.
Print Settings
Printer:
Geeetech A10
Rafts:
Doesn't Matter
Yes
Resolution:
0.20
15%
Filament: Hatchbox PETG Black
Notes:
PETG is best, though if you're only printing PLA, PLA should be fine. Supports are helpful, but I'd recommend playing around with it. I had the best luck printing it sitting on end - like how the original was printed.
Category: 3D Printer Parts