Headset Wire Clips for LG HBS-700 and HBS-730
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Best grippy/slidey compromise I could find for these two headsets. This is my first design. I'd print four clips for…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
Best grippy/slidey compromise I could find for these two headsets.
This is my first design. I'd print four clips for each headset, two for each side.
The two old LG headset models are slightly different sizes, and came with worthless clips that don't hold well and break easily.
The HBS-730 clip is 1mm thick and stronger than needed.
The HBS-700 clip is .8mm thick for faster printing at .8mm wall thickness and seems strong enough. This thickness prints quicker due to fewer passes.
Print Settings
Printer:
Monoprice Select Mini
Rafts:
No
No
Resolution:
.1
100
Notes:
PLA with a .4mm nozzle and .1mm layer height. No supports.
Haven't tried reprinting with Prusa or ABS.Category: Audio