Vive Wand - Full Body Tracking
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello! I recently bought a vive, and I received 3 extra controllers as a way to get full-body tracking in VRChat. I…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 715
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Hello!
I recently bought a vive, and I received 3 extra controllers as a way to get full-body tracking in VRChat. I couldn't afford the Vive trackers so I thought I'd make something to solve my issue.
I designed these mounts to sit at the bottom of your legs, you don't get the feet rotation in-game, but it works well anyways.
They are fastened using velcro straps that are about 37mm wide. I scavenged these from an old pair of knee-covers.
As for the hip-tracker, I used a design made by Chris Thomas (username: youkai)
Link: https://www.thingiverse.com/thing:4588259
To get the controllers to act as vive-trackers, I followed this very helpful guide by "Cas and Chary VR". You will need 3 steam controller dongles for this.
Link: https://youtu.be/8ykyS447OF4
If you don't have any controller dongles and don't want to buy them, there is a video explaining how to do the same but with cables.
Link: https://youtu.be/JZrDIvls1ms
I might update the design in the future!
Hope you like it!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
25%
Filament: Claes Ohlsson (local brand) PLA Transparent
Notes:
You can change your slicer setting to your liking but make it at least 25% infill and I would recommend at least 2-3 walls. I added a suggested printing orientation in the pictures.
Category: Games