xTool S1 Calibration "Stickers" for honeycomb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Calibration Stickers for Shoot background function in XCS 2.0
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 733
- Wydruki
- 4
- Wyświetlenia
- 2576
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made calibration “stickers” with pin for xTool S1 engraver to use it on honeycomb and make it stay in place
There are two versions. Normal version is good to go and tight version is a bit wider
I tried print it from white on bottom and black on top but I had an issue with sticking on bed so I decided to do black on bottom and white on top
You cannot put these stickers around the whole honeycomb. There is a limit for dimensions with this function or maybe it's a light (camera won't recognized dark spots) or camera angle issue
If you don't have black and white filament, you can use xTool S1 Calibration Stickers Colored model, print stickers S1 Stickers Printed document.pdf with your printer (laser, inkjet) and glue it on top of model
0,2 layer height is fine