Improved webcam cover for TERRA Webcam JP-WTFF-1080HD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Still a simple cover for the TERRA Webcam JP-WTFF-1080HD webcam, but a bit improved
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
After my first version survived a couple of months in our office, some colleagues managed to break it by … I don't know what they did. But an improved version was needed. Sadly, I used Shapr for the first version, so adjustments were hard to make.
That's the reason why I re-created it in onshape and with that got already the opportunity to use better measurement and position-possibilities. The main-improvement is probably the back of the cover, which is now way bigger and not so easy to break. Additionally, the little bulges at the sides of the lid are now equally positioned and have the same size.
The cover is just in use for two weeks now, but as I tried to break it (and failed), it might be already better than the first one. And yep, there are round corners now, because … why not?
Settings for the version in the images:
Filament:
Layer height:
0.16 (but should also work with 0.2)
Support:
yes (but you can block supports in the little holes, just let your slicer auto-orient the model and do its magic)
Infill:
10% triangles
Wall Loops:
5
These are the settings I used, others might work as well (e.g. less wall loops, different infill pattern and even another filament - its a simple model)