Clamp for Windmill (Toroidal | Sunflower | Honeycomb | Easter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This easy printable Clamp holds the Toroidal-, Honeycomb- & Easter Egg Windmill secure.
- Ocena
- 4,947 / 5
- Polubienia
- 232
- Pobrania
- 1564
- Wydruki
- 43
- Wyświetlenia
- 4512
- Oceny
- 38
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal Clamp for Windmill -> New Heavy Duty Clamp
On the top Site it has a hole to fit perfectly the rod from Hexagon, Toroidal and easter Egg Windmill.
Use the screw clamp to securely attach the wind turbine.
For example, to balcony railings, window sills or other boards and poles.
Screw Clamp fits up to 45mm square and Ø45mm pipes!
If you only use the full size, i added a alternative short screw ✔
The Clamp uses a simply mechanism which is easy to print, it does the job great! ✔
I printed in Basic PLA without problems ✔
Assembly:
Screw the handle in, you can grease a bit if you want
Place the loose jaw in place and screw in one time completly togheter. The Cone from the Screw should snap in the loose jaw.
Place the rod from the windmill in the hole on the top.
Find a good place and screw on gently
Thank you for leave a like…..Happy Printing😉👍