Easter/Gift Basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully 3D printed Easter Basket/Gift Basket for all your holiday needs
- Ocena
- 5 / 5
- Polubienia
- 103
- Pobrania
- 360
- Wydruki
- 3
- Wyświetlenia
- 1383
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Spring & Easter
- Licencja
- Creative Commons — Attribution — Noncommercial
Description:
Presented Above is a Fully 3D Printed Easter Basket/Gift Basket for all your Holiday needs. Great for Easter, Christmas, Birthdays, and just about any holiday you can think of. The geometric design is not just for Easter but is meant to be a neutral design for about any holiday/event. It prints in two parts for multicolor action between the handle and the basket itself.
Specifics:
Diameters: The bottom diameter of the basket is 2.7inches, increasing to roughly 4inches in the middle. In other words a takes up roughly the whole build plate on a Neptune 3 Pro.
Print Time:
- Basket: 33hours and 1 minute
- Handle 2 hours and 33 minutes
Supports:
- Basket: Supports are not required for the basket but l would recommend them
- Handle: Supports are definitely required for the handle
Temp:
- Nozzle: 200 degrees Celsius
- Bed: 60-65 degrees Celsius
Thank You:
Even if you don't print out this design Thank you for at least checking it out. Pls leave a comment on changes or improvements I could make or even if you just like it! Thank you for checking me out and Happy 3D printing.