dishwasher K-cup holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will secure DIY K-cups in your dishwasher
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Edit 4-1-2024: Added a style without the internal structure. That allows for better washing during the dishwasher cycle and uses less filament and quicker print time.
If you use those DIY KEURIG K-cups, then you know how annoying it is to clean them. After the grounds dry you can never shake out all the grounds. Running them under the faucet is a pain. But you can’t just throw them into the dishwasher. They will just bounce around and most likely retain grounds. They must remain in an upside down position to get clean and wash off the oils.
Enter the Dishwasher K-cup holder.
This little job will hold the cup secure on one of the upper level tines and will make sure all the grounds and oils are cleaned out. Just print and snap it in.