1 / 1
Mazda RX8 rear license plate bolt clip
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Broken/seized rear license plate bolts? Don't want to remove your bumper to fix it properly? This is what you need.…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Broken/seized rear license plate bolts? Don't want to remove your bumper to fix it properly? This is what you need. Can't say what year range will work but if the holes in your rear bumper are 15mm x 10mm this should work. Meant to take 6mm bolts around 12-15mm long.
Flat side faces inward, which should be obvious if you look at the hole. Print with something durable and not melty (I used PETG) unless you like chasing your license plate down the interstate.
Category: Automotive
