Articulated Follower - Battleaxe Polymer Mag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved follower for the Battleaxe 150 rnd Polymer mags, with design similar to the PTS mags
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
Improved follower for the Battleaxe 150 rnd Polymer mags, with design similar to the PTS mags!
The original follower in the Battleaxe magazines did not feed properly, so I designed these to help with that. I've taken much inspiration from the PTS EPM-1 Mags, with its articulated design as this seems to work very well.
You will need to trim the springs slightly to fit this follower, just cut off the end where the old follower was.
These are designed specifically for the Battleaxe Mags since this is what I have but they might fit other mags with similar design or dimensions.
PS. You will need a fairly well tuned printer for the joint to work, I recommend printing this with 0.12 layer hight. I printed it on a 0.4 Nozzle.