1 / 4
Sabertooth Tiger Smilodon Skeleton 3D Puzzle Kit Card
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FDM friendly remix of a laser cut model originally designed by Eureka Palouse. Optimized for color swap and friction fit
- Ocena
- 4,75 / 5
- Polubienia
- 120
- Pobrania
- 560
- Wydruki
- 5
- Wyświetlenia
- 1695
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (0)Kolekcje (215)Powiązane
FDM-Compatible Remix of the Laser-Cut Version by Eureka Palouse
- 30 Pieces
- The finished puzzle measures 17 x 12 x 6 cm
- 20 x 20 cm Kit Card version suitable for gifting
- Non-Kit Card version for personal printing
- A straightforward color swap is possible after layer 4 of 8 (at 0.2mm layer height)
Print Advice:
- Scaling:
Keep in mind that the friction fit of the parts depends on the z-height. When scaling, ensure that the print's z-height is a multiple of the layer height to ensure a proper fit.
- Print Speed & Bed Adhesion:
Print the first layer at a maximum speed of 20mm/s, ideally lower. Some parts still contain rather sharp and small details. The Kit Card version can assist with bed adhesion if the only-parts version presents issues.
- Print Bed & Color Swap:
All puzzle parts are oriented so that the outward-facing side of the model is the side touching the print bed. This ensures that a color-swapped print always displays the same color on the exterior. This might be an opportunity to showcase your fancy holo or patterned bed.
(Note that some HiH and other visually striking beds specify a maximum first layer temperature of 200°C.)