1 / 1
QIDI X-Max X-Plus I-Mate (S) Bowden Tube Connector — zdjęcie 1

QIDI X-Max X-Plus I-Mate (S) Bowden Tube Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a Bowden Tube Connector for the QIDI X-Max, X-Plus and I-Mate (S) printhead covers. Just remove the screw from t

Ocena
4,5 / 5
Polubienia
37
Pobrania
315
Wydruki
2
Wyświetlenia
2383
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

About

This is a Bowden Tube Connector for the QIDI X-Max, X-Plus and I-Mate (S) printhead covers. Just remove the screw from the top cover, place the connector and screw it in place with a 20 mm M3 screw. It is compatible with 6.0 mm PTFE tube, same dimension as the black tube that comes with the printer.

It is particularly useful to use with my Adjustable Internal Spool Holder if you want to keep the filament inside the case

Support

All my designs and mods on Printables are free to use and remix. They have a non-commercial license. If you enjoy this or any of my other designs you can send me a small donation using the link below. Thanks :)

https://www.paypal.me/humebeamengineering

Print Instructions

Print it as I have placed it, without supports. Layer height doesn't matter, I printed mine at 0.3 mm.

Installation 

Video

Tagi