Creality Nebula Camera Mount for the Ender 3 S1 Plus on the X Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an upgrade specifically designed for the Ender 3 S1 series of printers to mount on the Ender 3 S1 series of prin
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 728
- Wydruki
- 2
- Wyświetlenia
- 2650
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I loved the original design by Janb as it enables the camera to follow the print as it builds and is not obstructed by the bed. I found that the size of the camera, and the clip of the original version of the X-Axis was a little weak. So all I have done is extrude the bracket to the size of the camera's base and then added the bracket mount from @NS1PRO_1722488 in Fusion 360.
The camera will neatly slide into the box and remain firmly fixed, then away you go. Simples.
When it comes to printing the model should be in the correct orientation for it to print with no support necessary.
I printed it with eSuns Matt Black PLA+ Filament with these settings:
Prusaslicer High Detail Setting for my PLA+
Nozzle: 0.2mm
3 walls
4 top/bottom layers
15% Cubic infill
Weight: 39 g
Est. Cost £0.79
Time 3hrs 4 Mins
Added various file formats in case anyone wants to modify it.
STL, STEP, f3d, 3mf
f3d: Fusion 360
3mf: