Yamaha SW-motech M8 indicator cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to tidy up the installation of my after market indivcators (M8 size). My new saddel bags came with a bracket…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to tidy up the installation of my after market indivcators (M8 size). My new saddel bags came with a bracket to move the indicators but it wasnt pretty, so these fit in the yamaha indicator sized slots.
Printing:
Ideally ASA fort UV protection. But PLA, PLA/PHA, PETG or ABS probably works as wel, might wanbt to paint it for UV protection. "Seal" can be print from a flex mateial if you like, might need some resizing to fit optimally.
You'll need to tap the hole in M4. I used a stainless M4x8 DIN 912 screw
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.15mm layer, 0,4mm nozzle
Infill:
not much
Category: Automotive