1 / 3
Portable Monitor Stand Vesa 75 with pvc riser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a stand for my portable monitor.
- Ocena
- 4,5 / 5
- Polubienia
- 52
- Pobrania
- 319
- Wydruki
- 1
- Wyświetlenia
- 2386
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (73)Powiązane
Using 1/2” (21.3mm) pvc pipe for the vertical support, I used 5 - M4x8 screws. One screw is a set screw to allow for height adjustability. I think I printed mine with only 15% infill, the base seems stable enough even on a 15" length of pipe.