IEC320 C14 OpenScad clip-in insert shape
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an openscad configuration and stl shape to make holes in objects where IEC 320 C14 AC socket can be mounted
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 155
- Wydruki
- 0
- Wyświetlenia
- 939
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of https://www.thingiverse.com/thing:1342480/
This model includes non-keyed (rectangle) and keyed (a cutout that makes socket to be inserted only one way).
I removed all of the code that wasn't directly related to iec mount, then did a few prints until socket fit into sample part well enough.
The thickness of a wall between socket clip and front panel is 0.8mm (non-keyed) 1mm (keyed). The thickness is customizable, measure it on your socket with calipers first.
This design is not supposed to be used by itself – it is the shape of a hole to be made in other OpenSCAD designs.