Ender 3 KUSBA X-Axis mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount to hold the Klipper USB Accelerometer (KUSBA) to the fan shroud of the Ender 3
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A mount to hold the Klipper USB Accelerometer (KUSBA) to the fan shroud of the Ender 3. The KUSBA mounts to the... mount via two M3 nuts (place for them on the inside) and M3*5 bolts, and the mount itself friction fits to the fan shroud and is held in place with the top two bolts from the part cooling fan.
The idea was to design something that doesn't change the weight distribution of the x axis too much, doesn't require much extra hardware (read: stuff I had lying around) and didn't involve removing the fan shroud because those are the screws that hold my bltouch in place and for the love of god readjusting the offets on that thing every time I change something is getting tiring.
To install: Insert the two M3 nuts on the inside, screw the KUSBA in place using the two bolts. Remove the top two screws from the part cooling fan (the one on the right of the hotend). You can also loosen the bottom two to let the fan move more, but it's not necessary. Press fit the mount to the shroud, slipping the right “arm” between the shroud and the part cooling fan, put the screws back in to tighten it all down, and you're off to the races.