1 / 5
LED Shamrock — zdjęcie 1
1 / 5

LED Shamrock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Neon look Shamrock

Ocena
0 / 5
Polubienia
15
Pobrania
68
Wydruki
0
Wyświetlenia
285
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Creative Commons — Attribution — Noncommercial

Easy to print!

Solder usb leads to LED strip (use heat shrink to prevent shorting) 

insert the 5V 1M Green LED Strip strip into the channel. It's sized for 1M strip, no cutting needed.

In the pictures I wired up a 2 coin cell like this one, or this one (flashes!) but you can always wire up directly to USB like shown on the cactus. (make sure when purchasing the strip you get the 5V version either way) the two 2032 batteries last at least 2-4 hours, I haven't run out yet, so I can't tell you exactly how long, but they will likely dim a lot before expiring.

link to the cactus, see the instructions there for routing the LED lights and connector

5V 1M Green LED Strip

USB Pigtail (Male)

Tagi