Maxi Cosi Adorra parasol holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a printable version of the original parasol holder for the Maxi Cose parasol for the Maxi Cosi Adorra…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 540
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a printable version of the original parasol holder for the Maxi Cose parasol for the Maxi Cosi Adorra stroller. I wanted a second one, so that I can easily swap sides, but did not want toy pay 13 EUR + shipping. So I took out my caliper and reproduced the shape in Fusion 360. Works quite well. I printed it in black PLA. While mounting it, it some delamination on one side ot the thicker parts, but still works. Maybe ABS or PETG will work better.
Update 17.07.2020:
My first print broke, because of a gust of wind. The surface, to which the pin is attached, was ripped out. I print it again in PETG with more shells in this area.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
No
Supports:
Yes
0,2
Infill:
20%
Filament:
[
Das Filament PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Das+Filament+PLA&tag=thingiverse09-20) Black
Notes:
I used 3 perimeter shell with a 0,4 nozzle, except for the hexagon. Here I used 5 shells for stability reasons. I recommend printing it oriented like the STL file, so you get most stress in the layer planes and therefore the best stability.
Remove supports and attach to your stroller.
Category: Replacement Parts