Gardena adapter for bathtub tap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Gardena adapter for bathroom tap. Standard bathroom taps have a M24 thread. I wanted to use the…
- Ocena
- 4,667 / 5
- Polubienia
- 48
- Pobrania
- 291
- Wydruki
- 6
- Wyświetlenia
- 1669
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
This is a remix of the Gardena adapter for bathroom tap. Standard bathroom taps have a M24 thread. I wanted to use the adapter on the tap for my bath tub, but its outlet has a larger diameter with a M28 thread, so I edited the part to suit my needs.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
No
Supports:
Yes
0,2 mm
Infill:
30%
Filament:
[
Das Filament PETG ](http://www.amazon.com/s?url=search-alias&field-keywords=Das+Filament+PETG&tag=thingiverse09-20) blue translucent
Notes:
Make sure, you do not use PLA, when you attempt to use this adapter with hot water or it will soften. I used PETG and tested it with the hottest water setting I can get for my bathtub and it did not soften.
Remove supports
All supports have to be removed and support interfaces my have to be sanded.
Add sealing
If you do not add the black sealing, you will get a lot of leakage. Spare sealings can be bought, where you get Gardena parts or you can find a printable sealing here on Thingiverse.
Category: Bathroom