Baofeng UV5R good charger + stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Do not pay attention to the lack of a lower part of the charging. I made a version of the author, then realized that the
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 534
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Do not pay attention to the lack of a lower part of the charging. I made a version of the author, then realized that the walkie-talkie was falling under its weight and made a remix. Here. In my case, one adapter powers two walkie-talkies. But this is in my case.
My Bao have not a charger. I try charged with 2 wires from station for UV82 - change + and - for any effect.
This original model can't stand. Added place.
*I didn't use any chips from the dock of the original walkie-talkie!
Two wires directly to the battery contacts!*
Recipe:
• Two copper wires
• Drill bit as needed for wire holes
• 10V 0.5A power supply or BAO adapter
• Electrical skills
• Thermal gun
• Isolation
Тhe search for the plus and minus occurs according to the indication on the power supply. It remains only to twist the wires and pour hot glue. The stand should also be filled with superglue or thermal glue.
There is no charging pad in the photo. I fixed this in my model, if you don't need it, download the original.
Category: Sport & Outdoors