1 / 5
MagPul PMAG Extended Floorplate / Grip Extension
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended Floorplate designed for 10rd 5.56 PMAGs. Offers more real estate to grab onto. Doesn't increase capacity.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 205
- Wydruki
- 1
- Wyświetlenia
- 1830
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 1) (Komentarze: 8)Remiksy (0)Kolekcje (61)Powiązane
Extended Floorplate designed for 10rd MagPul 5.56 PMAGs. Offers more real estate to grab onto. Doesn't increase capacity. This model has an integrated plunger for easy disassembly and should be printed in place.
Versions available:
- v1: experimental version, not available anymore
- v2: Flat bottom; should be printed at an angle and needs supports under the entire
bottom surface (as shown in pictures) - v3: Angled Bottom inspired by oldschool 20rd Mags; only needs supports under the plunger
- v4: experimental version, not available anymore
- v5: like v3 but a bit shorter and without rim
- v5LT: like v5 but with cutouts on both sides
Recommended Print Settings:
- Print in place
- Print orientation and supports as shown
- 4+ Perimeters
- 15%+ Infill
- 0.15mm Layer Height
- After the print is finished make sure the plunger moves freely
Local laws apply
Most of my creations are available as STEP files aswell
If you need anything, feel free to reach out! Questions/Suggestions/Criticism is highly appreciated. Happy Printing…