Earring Smile sonrisa clasica
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model has two combinable parts, if you want to use them, one is the front and the other is the bottom.
- Ocena
- 0 / 5
- Polubienia
- 64
- Pobrania
- 273
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
The speed will depend on the machine and the type of PLA you are using. I always recommend that the first layers be printed at a speed between 10% and 20% (although if you are confident and know that the bed is perfectly leveled, you can increase the speed of the first layer to 40%). After that, you can adjust the speed as needed, keeping it between 80% and 100%.
Remember to add supports to ensure a proper attachment.🧀🧀
but I always advise keeping them active in case of any minor detail that the ring may need (that varies depending on the program you are using or your machine).
I'm a bit sleepy, can you help me with a beer? It's to keep creating things 👽🤘 buymeacoffee.com/instintkiller
Follow and more info: https://linktr.ee/instintkiller 🖤