LG Vesa Cover: VESA Adapter for LG Monitors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easily mount LG monitors with the LGVesaCover, a 3D-printed VESA adapter.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 757
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Filament Compatibility: Any type of filament can be used, offering flexibility based on your preferences or what you have on hand.
Layer Height: Set your 3D printer to a layer height of 0.2mm for an optimal balance between print speed and surface finish.
Number of Walls: Configure your printer to create 3 walls for each layer. This ensures the adapter is strong enough to support the weight of the monitor without being overly rigid or using excessive material.
Top and Bottom Layers: Apply 4 layers for both the top and bottom of the print. This increases the durability of the adapter, especially at the points where it contacts the monitor and the mount.
Assembly Screws: Utilize 4 M4 x 120mm screws for mounting. These screws are essential for securely attaching the VESA adapter to the monitor and then to the VESA mount.
Mounting Instructions:
- Begin by identifying the part of the adapter marked as the "Front side."
- Position this "Front side" to face the monitor, ensuring it aligns correctly with the monitor’s mounting holes.
- Place the adapter to the monitor. Proceed to screw your VESA support into the adapter. This will typically involve aligning the mount’s holes with those on the adapter and using the M4 x 120mm screws.