Back to back wheel gauge HO Hornby
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Back to back wheel gauge for HO trains. I use Hornby, but it is probably OK for lima etc It is 14.4mm between the…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Back to back wheel gauge for HO trains. I use Hornby, but it is probably OK for lima etc
It is 14.4mm between the inside of the wheels. As far as i can see that this is the recommended distance between the wheels for HO. All my kit carriages came too close together.
https://www.modelrailforum.com/forums/index.php?showtopic=15633
Printers aren't 100% accurate, so i printed a few at 98%,100%,102% and then used calipers to find the one that was exactly 14.4mm
Use a long 3mm screw to make a handle
Category: Vehicles