1 / 6
Antivibration foot for Prusa MK3/MK3S/MK3S+ — zdjęcie 1
1 / 6

Antivibration foot for Prusa MK3/MK3S/MK3S+

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New design of antivibration foot for significant reduction of noise at printing. Made of colorFabb varioShore TPU.

Ocena
4,5 / 5
Polubienia
43
Pobrania
288
Wydruki
3
Wyświetlenia
1794
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Antivibration foot needs to be printed from filament colorFabb varioShore TPU at 220 °C (available in black and natural white) - this filament uses foaming technology for changing density by temperature used at printing - therefore printed antivibration foot is soft and can absorb most of the vibrations at printing meanwhile printer is stable.

Printed on Original Prusa i3 MK3S+, satin powder coated sheet, no supports needed

Print settings:

  • layer height 0,2 mm
  • perimeters 2
  • solid layers 4 top, 4  bottom
  • avoid crossing perimeters, max detour length 100 %
  • skirt - loops 0
  • no brim
  • infill density 15 %, gyroid
  • top fill pattern monolitic, bottom fill pattern monolitic

Filament settings - based on colorFabb nGen flex standard profile in PrusaSlicer with following changes:

  • extrusion multiplier 0,57
  • density 1,22 g/cm3
  • temperature nozzle 220 °C, bed 40 °C

Filament used (per one piece, four needed):

  • length 1,60 m
  • weigth 4,68 g
  • cost 0,33 €

Tagi