Synesso Group Head Paddles and Steam Wand Lever
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a 3D printable group head paddle for Synesso espresso machines.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D printable group head paddle and steam wand lever for Synesso espresso machines. I printed these in Hatchbox Wood, sanded them with 150 grit sandpaper, stained them with dark walnut wood stain, and finished them with spray can lacquer.
Here are the La Marzocco Portafilter Handles I designed that you can also see in the pictures.
Printing & Post Processing
Any print setting should work, but I used 200um layers and 100% infill so that the handle would have a good weight to it.
I printed my in Hatchbox Wood, snapped it with 150 grit sandpaper, started it with dark walnut wood stain, and finished it with spray can lacquer. Don't sand much past 150 grit if you use the same filament as me. I found that it didn't take the stain as well and looked less like would if sanded past 150 grit.
The holes in the paddle fit the existing bolts for the Synesso group head paddles. Bolts will self-thread as you screw them in the first time, so be careful to screw them in straight.
The hole in the steam wand lever fits 5/16 in x 3 in threaded rode with a 18 thread size. Threads as you screw in, should be a very tight fit. I found the rod at my local hardware store.