USB Powered, Carbon Activated Soldering Fan with Gopro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my USB powered soldering fan with LED light. It can be mounted using most Gopro compatible mounting material…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is my USB powered soldering fan with LED light.
It can be mounted using most Gopro compatible mounting material such as my own designs:
Mounting System: https://www.thingiverse.com/thing:4110316
Stand/Tripod: https://www.thingiverse.com/thing:4126419
BOM:
120 mm Fan - I use one of those https://amzn.to/3vwWWUO (came with mounting screws)
5 M5x10 countersunk Screws
2 M3x8 Screws
Micro USB port - This one fits to my design: https://amzn.to/43Fw9lT
Step-Up Converter: https://amzn.to/43Fw9lT
LED - Light: I Use this: http://www.bastler-beutel.de/Download/Acrobat/LED/COB-W-FLM10-7W.PDF but any other flat LED also works
2A USB power Adapter with Micro USB cable: I use this hhttps://amzn.to/4abTCOd but any other Mobile Power Adapter capable of about 2A or more should be also fine.
Some double-sided tape for mounting the LED light
As filter material I use active carbon mat for hoods, trimmed to size such as: https://amzn.to/4cECDp9
For the Umbrella part you need to set the "Build Plate Adhesion" Type in Cura of None to get some additional printing space. Otherwise it may not be sliced.
It is important to screw the Poti of the Step-Up Module to 12 V checking with a Voltmeter. Cabling is shown on one of the photos. It takes a lot of revolutions until the voltage is changing. My setup with my Fan and LED-Light needs about 2A of current so you should have a USB power adapter which is capable of this.
Category: Tools