S&W M&P 15/22 Cheek Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cheek riser to raise your eye to better align with your sights or scope.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 969
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This helps line your eye to the optic or sight when shooting from positions such as those in the Appleseed events. Install by removing your collapsible butt stock and sliding over the “Buffer Tube”. The fit can be snug. Re-install your butt stock on the last slot. Locks your butt stock all the way to the rear on the last hole. Charging handle can be accessed with no obstructions. Currently I have a High and Standard version. The High works better for me with Irons and the Standard works better with Scope.
If you have one of the older rifles with no bird cage flash hider and the forearm with the four picatinny rails, try the “old style” version. The buffer tube seems to be a little larger on the older rifles than on the newer version with the mlok and flash hider.
Printed on a Prusa Mini and MK3S with supports on build plate and a 10 mm outside brim. Printed in Petg with 25% cubic infill. Print standing on end. I also sandblast my finished products with about 20-40 PSI and whatever grit the shop blaster is loaded with at the moment to kill the glossy finish.