OOLER/Chilipad Drain Key and Fingertip Saver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drain key for OOLER/Chilisleep machines plus adapter to aid in pressing the key.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 153
- Wydruki
- 1
- Wyświetlenia
- 745
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement OOLER/Chilipad drain key plus a helper tool that I've dubbed the “fingertip saver”. The fingertip saver provides additional surface area for pressing in the drain key, allowing use of 2-3 fingers on each side of the drain key, eliminating the impressions left on fingertips after prolonged or repeated use of the drain key in one sitting.
- PLA/PETG (sample pic used PLA)
- .20mm layers
- 15% infill
- No supports are needed
- Brim recommended
Make sure there are no strands covering the hole after printing. Heating the inside of the key and inserting an appropriately-sized screwdriver into the plug for a few seconds until the plastic cools will ensure a nicely formed key hole.
