Fiberglass Mast Light Wire Antenna Attach Point - Customizable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wire antenna attachment point for a telescoping fiberglass mast.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
As with anything like a radio antenna mast (or anything you're using above the ground) PRINT AND USE THIS AT YOUR OWN RISK. No warranty nor guarantee is provided with this part. With your use of this part or its derivatives you assume all liability. This is especially true because of differences in printing setups, environments, etc. It is not designed to be a guying attachment point.
Important note: As of this writing the topper has not been tested in any way, shape, or form. It has simply been given a test fit in my mast.
Caveat emptor.
This is designed to be a topper for a fiberglass antenna mast. You may find it useful for very light things like thin wire antennas. IT IS NOT DESIGNED TO BE USED AS A GUY WIRE ATTACHMENT POINT.
Also available via github: https://github.com/shortword/openscad_models