Fully printed, adjustable contour gauge / Konturenlehre
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast-printed contour gauge
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This will come in handy whenever you want to print some household improvement, but the contours, edges and slopes are diffucult to measure or hard to reach.
Admittedly, this is pretty rough, especially when compared to commercially available solutions, but at least its fully printed :)
Choosing the parts
There are two screw sizes to choose from:
- the shorter one (40mm) holds 6 plates, like in the images
- the longer one (70mm) holds 12 plates
The topmost plate must be the “Plate-Top.stl”! This means, for the short version, you are going to need 5 regular plates and one top plate.
Printing
I'm a bit impatient so I used 0.2 layer height, 2 perimeters, 2 top and bottom layers, 10% gyroid infill. Works fine, even when strongly tightened.
No supports are needed.
Assembly
Just stack the plates and connect screw and bolt.