Escutcheon for 1/2" Toilet Shutoff Valve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fairly specific ellipsoidal escutcheon for my particular situation, but others may find the model useful.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a fairly specific ellipsoidal escutcheon for my particular situation. The valve bonnet is not centered in the hole in my tile, and the rotation is off by a few degrees relative to the back wall.
I have included the .f3d AutoDesk file in the event anyone would like to edit this to be more useful to themselves.
I cut the model down the center of the bonnet opening in PrusaSlicer before printing, then glued it back together when in place using cyanoacrylate (Super Glue). Secured to the floor with a drop of silicone caulk so it doesn't move.
Ironing enabled on the topmost surface looks quite nice.