7mm-08 Remington Bullet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend of mine asked me to make this bullet holder for the 7mm-08 Remington.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why I made this
A friend of mine asked me to make this bullet holder for the 7mm-08 Remington. He was inspired by this one https://www.thingiverse.com/thing:4970230, but he did not want the tip to be covered. He wanted something very simple, the bullets to be held by friction only. Furthermore, he said he wanted to used 3M double-sided tape to stick it on his rifle.
He also said he wanted to be easy to access and retrieved each bullet, so I thought I make them offset, but I wasn't sure how offset to make them, so I gave him the option to adjust it to his liking, all he needs to do is use superglue to fix each holder in place.
Build
I build this with 0.8mm nozzle for speed of print (I really need a 0.6mm nozzle 😐) I use PETG because this is meant for outdoors and heat, I still need to test this and make sure it holds to abuse.
Community Notes
If you make this, please let me know and provide me feedback. I would love to hear your experience making this. Let me know what you like and what you don't like about it.