Minimalistic Cosmere Pin Series Display (Laser or Printed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE: I turned these laser-cut files into .stl-files for 3d printing. Let me know how they work for you! I had a…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 437
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Share Alike
UPDATE: I turned these laser-cut files into .stl-files for 3d printing. Let me know how they work for you!
I had a bunch of pin to display (from Dragonsteel/Brandon Sanderson's work), and came up with a minimalist design. The idea is to keep the pins on their backing paper since that also has their name on it.
Glue the pieces together according to the third image. As is, it is meant to be mounted with a piece of french cleat. This design should in theory work for other pins, cards or things, although you might need to scale it accordingly.
Just to make sure, the original file was intended to be laser-cut from 3mm material. I used plywood, but something transparent would do the trick just as well.
Print Settings
Notes:
Use a laser-cutter and 3mm material for this one!
Category: Signs & Logos