40mm Coin Jig for The Gweike G2 Fiber Laser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this coin jig to tightly hold a 40mm and to slide securely in to the holes of the work plate on a Gweike G2.
- Ocena
- 4,667 / 5
- Polubienia
- 39
- Pobrania
- 341
- Wydruki
- 0
- Wyświetlenia
- 1117
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this coin jig to tightly hold a 40mm and to slide securely in to the holes of the work plate on a Gweike G2. Now, it could very easily work on other machines. This is my first fiber laser and I do not know if the hole spacing on other work plates is the same.
Not that it's hard to keep a flat hunk of brass from moving, but things happen. machines get bumped. It's a simple design. It prints quickly. I made mine with regular ol' PLA.
Thanks for having a look and I hope it might be useful for you.