Outdoor Dog Poop Bag Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print and assemble Dog Poop Bag Dispenser for outdoor use.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 617
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome, If you enjoyed my model, please consider supporting me by sharing your make and leaving a like. For information, filament tests, and much more, all about 3D printing, feel free to check out my homepage or join my Filament Deal Channel. Check out my models :) |
An easy to print and assemble Dog Poop Bag Dispenser for outdoor use.
Fits one rolle of basic poop bags (up to 8cm width)
4 different holes for easy installation.
Printing
If you want to use it outdoor, I recommend to use a material like PETG or ASA, especially if it is exposed to the sun. You don't need support. Don't forget to apply a fresh glue stick coating for your build plate. A brim is recommended but not needed.
Each part is on its own plate.
If it doesn't fit, you should calibrate your printer. I used medium tolerances, so the parts should press fit.
Use 0.16mm Layer height.
BOM
Additional to the printed parts you'll need 3-4 steel dowel size 2.5mm x 18mm. You can find them here: Amazon| AliExpress 1 | AliExpress 2
Share your makes and support me
If you like my work, you can support me here, via Ko-Fi or Patreon. Please leave a comment or share your makes 😁
If your interested in selling the printed models DM me.
