1 / 2
Creality Nebula Camera Mount for Creality Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits great, gives a great view, and easily attaches to the current setup without having to disassemble the enclosure.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 306
- Wydruki
- 3
- Wyświetlenia
- 1762
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (3)Kolekcje (46)Powiązane
I wanted to mount my Nebula camera up out fo the way but still have a good full-size view of my build plate. Since I have my Ender 3 V3 KE inside the Creality Enclosure I designed something to work. This clamps to the 8mm rod used in the enclosure using 2 #6 self-tapping woods crews. Fits great, gives a great view, and easily attaches to the current setup without having to disassemble the enclosure. Link to the enclosure below that I am referring to.
Printer Settings:
- Printer brand: Creality
- Printer: Ender-3 V3 KE
- Rafts: No
- Supports: Yes
- Resolution: .20
- Infill: 25
- Filament brand: Creality
- Filament color: Yellow
- Filament material: PLA
- Notes: I used PLA but you can use what you prefer. I did go with 4 walls and 25% infill. The only support needed is under the Nebula mounting surface. If you set your support gap distance to .30, it removes easily and leaves a good surface finish.