Makita Ni-MH 12v to Makita LI-ion BL1020B adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makita 12v NI-MH adapter. For those who has old makita drill laying around and BL1020B battery. In short - you most…
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 858
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Makita 12v NI-MH adapter. For those who has old makita drill laying around and BL1020B battery. In short - you most likely know if you need it.
There are 4 parts to print but you can get away with 2 as other 2 are just simple pins i created to hold the adapters ( they are crap, not fine tuned so just skip them ) .
You will need :
4 x M4 bolts and 4 x m4 nuts
Nickel strips to create contact points.
Pliers, scissors. No soldering required ( unless you want it ).
Adapter is still work in progess but functional. Good luck and have fun! I'm hoping you found it usefull.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Notes:
Can't remember how i printed it but i guess go with a feel. 4 walls, 30 - 40 % infill and i believe no supports required.
How I Designed This ===================










This is how i attached nickel strips. Insert strips connect to battery mount and being hold by 4 x m4 bolts and nuts
Category: Tools
