1 / 5
Gamin Zumo XT to BMW R1250GS Navigator 6 mount adaptor — zdjęcie 1
1 / 5

Gamin Zumo XT to BMW R1250GS Navigator 6 mount adaptor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These parts adapt a Garmin Zumo XT to the standard BMW navigator mount R1250GS. Maintains the OEM locking function.

Ocena
0 / 5
Polubienia
3
Pobrania
60
Wydruki
0
Wyświetlenia
951
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These parts allow the Zumo XT to fit into the standard BMW R1250GS Navigator 6 mount and maintains the OEM keyed locking function. 

The Zumo XT has slightly different dimensions to the OEM system so offset holes need to be drilled through the OEM mounts body. The spacer part has locating pins that fit into the standard holes and indicate the new hole locations ie. its a template too. They are M4 screws so 4 or 4.5mm drill bit. The spacer is designed to stay in-place behind the Garmin mount.

The replacement lock mechanism piece has a pin that slides under the Garmin release lever preventing it from being operated. A new backing plate is provided that lines up with the new hole locations although it is not really necessary.

Getting your finger in to operate the release lever could be a bit tight but it works for me