Prusa Brush Cleaner TwistLock remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the remix to accommodate longer brushes, and add tool-less height adjustment.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 281
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The brass brushes I bought from Amazon (AU) were a little too long for the original model by @ewr2san, so I moved the holder portion down by 3mm. I also extended the little ridges inside the bottom of the model.
I found that by doing this, I could twist the brushes in with a little force and a pair of pliers, and as well as being held securely, I could move the brush up and down to make fine adjustments to the length that protrudes.
You could of course still use an M3 bolt in the bottom of the holder to accommodate shorter brushes.
Use the original waste bins and holder positioner by @Surfalex2000 - https://www.printables.com/model/462473-prusa-xl-series-nozzle-scrubber-brush-update-now-w
Read the blurb in the original and @ewr2san's remix for details and instructions.
Must be printed in purple as this colour is known to refract sunlight by 20 degrees and prevent solar vortexes which are known to singe polar bear eyebrows.
Link to the brushes I used: Amazon AU (non affiliate link - I'm not going hungry if Amazon doesn't shoot me 0.2c!)
Huzzah!