1 / 9
(new) Tomato ring culture for growbags and brackets for canes, with irrigation attachment — zdjęcie 1
1 / 9

(new) Tomato ring culture for growbags and brackets for canes, with irrigation attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tomato ring culture for growbags with cane brackets , now with irrigation attachment

Ocena
0 / 5
Polubienia
1
Pobrania
22
Wydruki
0
Wyświetlenia
451
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Supercharge your tomato Yields in a growbag. increasing the number of roots on a tomato plant increases the size and number of tomatoes a plant can produce.

Growing tomatoes with ring-culture pots involves surrounding the crop with a bottomless ring and adding layers of compost at 10-14 day intervals. This encourages the tomato to root from the stem so it can take up more water and nutrients than it would get from the growing bag alone. The result is vigorous, productive plants.

You will need:

  • Growing bags
  • 1 base (per plant)
  • 1 reservoir ring (per plant)
  • 1ring culture part 1 (per plant)
  • 1 ring culture top (per plant)
  •  1 or two top support (per plant) depending on your requirements.
  •  4 bamboo or other canes for support (per plant)
  • 4 narrow cable ties to secure the support top (per plant)
  • Secateurs
  • Multi-purpose, peat-free compost

Total time: 15 minutes

Step 1:

 Follow instructions on the growbag to create drainage holes in the bottom. 

Place a base under the growbag beneath where the plant will be. 

Cut a diagonal cross in the top of the growbag the size of the reservoir ring (corner to corner) the reservoir ring and the part 1 will be placed into the hole created and the flaps folded back over.

Insert canes through the growbag so they pass through the corner holes of the part 1 and reservoir ring  then seat in the base.

place the top support onto the canes and secure using the cable ties using the small holes in each corner collar.

Place the top onto the part 1 unit so that the cut out aligns with the spout.

 

Step 2:

Plant the tomato in the compost, stake, firm and water well as you would normally. Place the top onto the part 1 unit so that the cut out aligns with the spout Then, add a 2-3cm layer of compost to the pot every 10-14 days, until it's full. Try to water the plant daily ( this is easiest if automated watering is used- pass the watering tube through the holes in the top), and give it a liquid feed every week using the spout in the part 1 unit. do not spray leaves with water.

Step 3:

Remove sideshoots from plants as you would normally. When fruits start to develop, remove leaves which would otherwise shade them, so they ripen fully.

Step 3:

Harvest enormous crop of delicious tomatoes YUM YUM YUM!

can also be used for peppers and chillies.

I will update photos when it is growbag and tomato growing season in the UK

 now includes drip irrigation ring attachment and under soil feeding.