Bambu X1/P1S Chamber LED Riser (Philips Hue Lightstrip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bambu Lab X1/P1S LED Riser for the Philips Hue Gradient Lightstrip
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 300
- Wydruki
- 3
- Wyświetlenia
- 2701
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Full credit to dkarjadi for the original design and to DuckMeat for the reinforced remix.
Why this remix?
As I have replaced all the lights in my home with Philips Hue, I also wanted to control the lights on my printer using the same app. I used the remix from DuckMeat as the base model and adapted it for the Philips Hue Gradient Lightstrip.
Print Details
For my prints I used Bambulabs PLA Matte Black with snug support and 20% grid infill.
Basically the standard 0.2mm Bambulab settings.
I also glued the individual elements together with cyanoacrylate adhesive before mounting the lightstrip.
Lightstrip Installation
At a length of approx. 130 cm, there is a mark on the lightstrip, marked by a small triangle.
You can cut it at that point.
Once you have attached the light strip to the contour of the riser, you can simply push the cable plug into the rear corner.
And you're done, just add the TPU seals and place everything on top of the printer.